CASTING & COMPOSITES

CASTING & COMPOSITES > Release agents

Release agents

Description
Main applications
GLOBALWAX 200 L

Description

Solvent-based liquid release agent, it creates a waxy film on the mold, with a strong anti-adhesive action and a resistance to temperatures up to +130°C.
The surfaces treated with GLOBALWAX 200L can be subsequently painted. It is used with a brush.

Main applications

Processing of models and prototypes in resin, molding of manufactured articles, reinforced resins and as a release agent in resin injection moulding.
It can be used on metals, plastics, polystyrene, resins, wood and plaster. In the case of use on wood and plaster, it is necessary to treat the surfaces in advance with our SEPARATORE VPA or, if this is not possible, apply several coats of release agent.
GLOBALWAX 200 S

Description

Solvent-based spray release agent, creates a waxy film on the mold, with a strong anti-adhesive action and resistance to temperatures up to +180°C.
The surfaces treated with GLOBALWAX 200S can be subsequently painted. Supplied in a practical spray can.

Main applications

Processing of models and prototypes in resin, molding of manufactured articles, reinforced resins and as a release agent in resin injection moulding.It can be used on metals, plastics, polystyrene, resins, wood and plaster. In the case of use on wood and plaster, it is necessary to treat the surfaces in advance with our SEPARATORE VPA or, if this is not possible, apply several coats of release agent.
GLOBALWAX WATER EMULSION V

Description

It does not grease the surface of the molded object, unlike the oils generally used.It can be used pure or diluted with water, by spray or brush.

Main applications

It is used as a release agent or disarming agent for prefabricated concrete.
SEPARATORE VPA

Description

Polyvinyl alcohol in aqueous solution, it polymerizes in contact with air, forming an insulating film with a glossy finish, completely insoluble in common solvents, but easily soluble in water. Very fluid, it can be easily used by spray or brush.

Main applications

It can be used as a filler on very porous surfaces (such as wood and plaster) before applying a suitable wax-based release agent or used as a release agent for plastic / resin moulds (polyester or epoxy) in the car/motorcycle bodywork sector.

MECHANIZED EXCAVATION

Solutions for consolidation and waterproofing inside tunnels and mines, consumables for mechanized excavation by TBM (Tunnel Boring Machine) and MTBM (Micro-tunnel boring machine), HDD systems (Horizontal Directional Drilling).
More

COATING & TREATMENT

Additives and coatings for the protection of wall and floor surfaces. Thermo-efficient coatings. Disarming. Surface treatment.
Protection and cleansing.
More